SIKA
Whether you are building a bridge, an airport or a new house, we understand that you have to find the best materials to do the job with structural integrity, strength and speed. The raw materials that go into the construction project should meet the best price to performance ratio. From concrete and cement to grout and structural adhesives, count on Sika to provide you the best products and systems.
PRODUCTS
Sika AnchorFix®-1
High strength, two component adhesive anchoring system
Sika AnchorFix®-1 adhesive anchoring system has been specially formulated as a high-performance, two component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
Usage
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
Can be used on:
- Uncracked Concrete
- Solid masonry
- Hard natural stone*
- Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discoloration.
Advantages
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- Non-sag, even overhead
- Styrene-free polyester resin
- Low wastage
Sikaflex®-1A
Elastomeric joint sealant / adhesive
Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can be used in green and damp concrete applications. Meets Federal Specification TT-S-00230C, Type II, Class A. Meets ASTM C-920, Type S, Grade NS, Class 35, use T, NT, O, M, G, I, A. Canadian standard CAN/CGSB 19.13-M87.
- Eliminates time, effort, and equipment for mixing, filling cartridges, pre-heating or thawing, and cleaning of equipment.
- Fast tack-free and final cure times.
- High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear -resistance.
Usage
- Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in.
- Excellent for small joints and fillets, windows, door frames, reglets, flashing, common roofing detail applictions, and many construction adhesive applications.
- Suitable for vertical and horizontal joints; readily placeable at 40°F
- Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion.
- Submerged conditions, such as canal and reservoir joints.
Advantages
- Eliminates time, effort, and equipment for mixing, filling cartridges, pre-heating or thawing, and cleaning of equipment.
- Fast tack-free and final cure times.
- High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear -resistance.
- Stress relaxation.
- Excellent adhesion – bonds to most construction materials without a primer.
- Excellent resistance to aging, weathering.
- Proven in tough climates around the world.
- Can be applied to green concrete 24 hours after pour
- Can be applied to damp concrete 1 hour after getting wet
- Odorless, non-staining.
- Jet fuel resistant.
- Certified to the NSF/ANSI Standard 61 for potable water.
- Urethane-based; suggested by EPA for radon reduction.
- Paintable with water-, oil- and rubber-based paints.
- Capable of ±35% joint movement.
Sikaflex®-1c SL
High performance, self-leveling, 1-part polyurethane sealant
Sikaflex®-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, M, A, G, I.
- 1-component, no mixing
- Self-leveling, pourable
- Accelerated curing
Usage
Sikaflex®-1c SL is used to seal horizontal expansion joints in concrete and cementitious slabs such as:
- Sidewalks
- Balconies
- Pavements
- Terraces
- Warehouses
- Factories
- Civil Structures
- Plazas
- Pitch Pans
- Canals and Water Treatment
Advantages
- 1-component, no mixing
- Self-leveling, pourable
- Accelerated curing
- Can be applied to green concrete 24 hours after pour
- Can be applied to damp concrete 1 hour after getting wet
- Extremely elastic
- High durability
- Resists aging, weathering
- Excellent adhesion
- Convenient, easy-to-use packaging
- Jet fuel resistant
- Water Immersion Applications
Sikadur® Crackweld Kit
Two component, low viscosity, fast curing epoxy sealing system for repairs to cracks in concrete and solid masonry. Conforms to ASTM C-881.
- As strong as concrete.
- Convenient mix in the nozzle cartridge system.
Usage
- Low pressure injection of cracks in structural concrete and solid masonry.
- Gravity feed cracks in horizontal concrete and horizontal solid masonry.
Advantages
- As strong as concrete.
- Convenient mix in the nozzle cartridge system.
Sikadur® Crack Repair Kit
Sikadur® Crack Repair Kit, a new concrete repair system for concrete and solid masonry walls and floors based on epoxy-resin injection. This kit features both the crack-sealing material and crack filling resin and all necessary application accessories. It’s easy application is achieved through cartridges that fit standard caulking dispensers. Fast repair for all types of minor damages. Sikadur® is a safe application due to its CE-marking according to EN 1504-5 for injections
- As strong as concrete.
- Convenient mix in the nozzle cartridge system.
- Low-pressure, epoxy resin based injection
- For cracks in concrete and solid masonry
- For walls and floors
- Contains crack-sealing material and crack filling resin and all necessary application accessories
- EMEA: CE-Marking according to 1504-5
- Conforms to ASTM C-881 Grade 1, Class C, Types I, II
