Alliance Products

Signature Gator Seal Natural Look finish, zero gloss, water based sealer for natural stones is made from fluorochemical polymers. This sealer penetrates deep into the concrete pavers, walls, masonry and natural stones, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt.

Features

• Non film forming
• Water repellent
• Works at above 32°F (0°C)
• Applicable on damp surfaces
• Water base sealer
• ZERO VOC

Helps Resist

• Corrosion from de-icing salt
• Ultraviolet rays effects
• Motor oil & grease stains
• Stains up to 10 years

GATOR SEAL SATIN LOOK sealer is made from acrylic based polymers. Gator Satin Look sealer penetrates deep into the concrete paver, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt. Specifically formulated to be used on unsealed surfaces only.

Features

• Protects and enhances look
• Easier to clean and maintain
• Solvent-based
• Joint stabilizer
• Film Former

Helps Resist

• Corrosion from de-icing salt
• Ultraviolet rays effects
• Motor oil and grease stains

Gator Resealer for concrete pavers is made from acrylic based polymers. Gator Resealer will penetrate the formula of the existing
sealer and reactivate the molecules to create a rejuvenated seal to protect the paver surface. Thus reducing the penetration of oil and dirt, as well as protecting them from de-icing salt.

Features

• Easier to clean and maintain
• Solvent based
• Revives look
• Can be applied over Gator Seal
• Wet and Satin Look finishes

Helps Resist

• Corrosion from de-icing salt
• Ultraviolet rays effects
• Motor oil and grease effects

GATOR SEAL WET LOOK SEALER sealer is made from acrylic based polymers. Gator Wet Look sealer penetrates deep into the concrete paver, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt. Specifically formulated to be used on unsealed surfaces only.

Features

• Protects and enhances look
• Easier to clean and maintain
• Solvent-based
• Joint stabilizer
• Film Former

Helps Resist

• Corrosion from de-icing salt
• Ultraviolet rays effects
• Motor oil and grease stains

GATOR MAXX SAND is a unique mixture of polymer binders and calibrated sand available in Beige and Slate Grey. The installation of GATOR MAXX SAND is almost identical to using regular paver joint sand except for the application of water. Once GATOR MAXX SAND sets, it becomes very firm and locks between the paver joints while still retaining flexibility and providing a long lasting, durable jointing material. GATOR MAXX SAND is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements etc. Ideal for concrete pavers, natural stones and wetcast prodcuts.

Features

• Advanced Haze Free Technology.
• Can be used for joints up to a maximum of 2 inches. ASTM C144 gradation allows use in even the tightest joints.
• OSHA cristalline silica compliant (OSHA 29 CFR 1926.1153).
• For drainage and non-drainage, residential and commercial applications.
• Drainage applications, Rain safe 1hour after water activation.
• Non-Drainage (Overlays) applications, Rain safe 24 hours after water activation.
• Works above 32°F/ 0°C
• Can be used on false joint pavers.
• Helps prevent weeds and damage caused by burrowing insects.
• Helps prevent erosion due to wind, rain, and freeze thaw cycles.
• Waterproof bags. Intact pallets or bags can be laid flat and stored outdoors. (Lay bag flat on its back, so front of the bag is facing you.)
• Could be used in a Gator Base application.

(FOR RESIDENTIAL AND COMMERCIAL APPLICATIONS)

GATOR MAXX G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. The polymeric sand application is now dust free and haze free. No blower is needed and the intelligent polymeric sand requires only one watering. GATOR MAXX G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Available in Beige, Slate Grey, Ivory and Black Diamond. Ideal for concrete pavers, natrual stones, wetcast products and clay pavers.

Features

• Can be used for joints up to a maximum of 4 inches in drainage application and 2 inches in overlay application
• For overlay, non-overlay, residential and commercial applications
• ASTM C144 gradation allows use in even the tightest joints
• OSHA cristalline silica compliant (OSHA 29 CFR 1926.1153)
• No Dust, Haze Free, No Blower, and one watering
• For Drainage application, Rapid Set rain safe 15 minutes after water activation.
• For Non-Drainage application (OVERLAYS), rain safe 24 hours after water activation.
• Works above 32°F (0°C)
• Faster insallation time
• Ideal for Gator Base applications
• Can be used on false joint pavers
• Helps prevent weeds and damage caused by burrowing insects
• Helps prevent erosion due to wind, rain and freeze/thaw cycles
• Waterproof bags. Intact pallets or bags can be laid flat and stored outdoors. (Lay bag flat on its back, so front of the bag is facing you.)

Gator Efflorescence Cleaner will remove any efflorescence stains trapped in the concrete pavers, wet cast products & natural stone pores. It will make the surface look more clean and vibrant without discoloring or damaging
the surface. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now clean pores.

Features

• Removes efflorescence from the surface of concrete pavers, wet cast products & natural stones
• No hydrochloric acid in product
• Washes off with water
• Cleans approx. 200 sq ft (18 sq m) per gallon

Gator Sealer Stripper is extremely effective for removing sealer from concrete paver or stone. It is a paste, it is easily applied with a brush, or roller. Gator Sealer Stripper is formulated to remain wet and effective over extended periods. Always preform a test area to determine exact reacting time. To use, apply to surfaces with a brush, roller according to test patch results. Once is ready to be removed use power washer to strip surface. Be sure to scrub remaining residue with nylon brush and water. Allow surfaces to air dry before resealing.

Features

• Will not burn skin
• Removes multi layers in a single application
• Environmentally responsible: water based
• Virtually no odor
• Zero VOC
• pH neutral – No neutralization necessary
• Shelf Life of 2 years if container and kept well sealed in a warm, and dry environment

Gator Clean XP Oil and Grease Remover easily removes tough stains from motor oil, cooking oil, grease, wax, and more. Just shake it, spread it on the stain, let it dry, and sweep it off. Rinsing is needed if product has aged. Use it on concrete, brick, stone, composite decking, and more. Do not use on asphalt (blacktop). Gator Clean XP Oil and Grease Remover is biodegradable and phosphate-free.

Features

• Easily lifts & absorbs embedded oil stains as it dries from liquid to powder
• No scrubbing, no rinsing, no mess

Gator Rubber, Paint & Tar Remover + is effective in removing rubber, oil-based paint and tar from the surface of concrete pavers, wet cast & natural stones. Can be use as a cleaning agent for tools when working with Gator Rock Bond or to re-emulsify any sealer type.

Features

• Washes off with water.
• Easy to use.
• Emulsify some sealers
• Remover & cleaner for bonding agent
• Cleaning sealing tools such as sprayer

Gator Clean Rust Remover is effective in removing rust from the surface of concrete pavers, wet cast products & natural stones.

Features

• Washes off with water
• Contains no muriatic acid
• Removes the spots caused by steel, water build up fertilizer, etc.
• Easy to use

Gator Clean Shampoo removes ground-in dirt from the surface of concrete pavers, wet cast products & natural stones. It will make the pavers, patio slabs, walls & natural stones look clean and vibrant.

Features

• Removes penetrated dirt
• Restores the elements to their natural color
• No muriatic acid in product
• Washes off with water
• Cleans approx. 375 sq ft (35 sq m) per diluted gallon

Gatorene is ideal for removing, retouching & restoring water & solvent-based sealers. Gatorene will also remove certain adhesives, and is an excellent clean-up solvent for tools and equipment immediately after use. Not intended for sale or use in California. It is also great for clean up and flushing of sealers, metal sprayers.

Features

• Degreasing and cleaning tools.
• Thinning specialty coatings
• Flushing metal sprayers