KINGS stocks an assortment of MAPEI products. Choose from a lineup of highly versatile, non-sag/nonslump large-and-heavy-tile mortar and thin-set mortars, setting bed mortars, adhesion primers, accelerated-cure screed Mortar, waterproofing and crack-Isolation membrane, acrylic latex admixture and more. MAPEI sets a gold standard for its product line and KINGS is proud to offer our customers MAPEI products for their projects. To learn more about MAPEI products, visit your local KINGS showroom/yard.
Professional, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer
Premium, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer
Standard, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer
MODIFIED MORTAR BED
Polymer-Modified Thick-Bed and Render Mortar
Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.
NOVOPLAN 2 PLUS
Professional, Self-Leveling Underlayment
Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors.
Acrylic Latex Admixture for Mortar and Stucco
Planicrete AC is a one-component, concentrated, liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos and toppings.
PLANITOP 330 FAST
Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar
Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8″ to 1-1/4″ (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.
Accelerated-Cure Screed Mortar
Topcem Premix is an accelerated-cure screed mortar suitable for bonded as well as unbonded applications. Topcem Premix can easily be screeded or sloped, and has the workability and working time of conventional screed mortars.
Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane
Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee.
Premium Waterproofing and Crack-Isolation Membrane
Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.